How to Brew Coffee at Home: Ratio, Grind and Heat, Minus the Snobbery

Home brewing isn't a lab exam. Start with about 55 grams of coffee per liter of water (roughly 1:18, or about 20 grams for a 12-ounce mug), then adjust grind and contact time if the cup tastes off. Water temperature is less sacred than the internet claims: certified machines aim for about 92–96°C (198–205°F), but in one university test, trained tasters couldn't tell 87, 90, and 93°C apart once strength and extraction were held constant. Here's what's measured, what's myth-adjacent, and what to change when your cup tastes wrong.

Two numbers explain your cup: strength and extraction

In 1957, Ernest Earl Lockhart, director of the Coffee Brewing Institute, proposed judging coffee by how much of the grounds actually dissolved into the drink. Today that's split into two numbers. Brew strength is the share of the cup that is dissolved coffee solids, called total dissolved solids or TDS. Extraction yield is the share of the dry grounds that ended up in the cup. The two are linked by your brew ratio, how much water you use per gram of coffee. Lockhart's work became the Coffee Brewing Control Chart, which brewing classes still teach.[1]

For scale: to earn Specialty Coffee Association (SCA) certification, a home drip machine has to make coffee that is 1.15% to 1.45% dissolved solids, from an extraction of 18% to 22% of the grounds.[2] Yes, your morning coffee is about 98.5% water. Treat it accordingly.

Start with the ratio: about 55 grams per liter

The SCA's "Gold Cup" ratio is roughly 55 grams of coffee per liter of water, about 1 part coffee to 18 parts water. Even the certification lab treats it as a starting point and adjusts grind and contact time from there.[2] Since a milliliter of water weighs about a gram, the math is easy on a kitchen scale:

  • A 12-ounce mug (about 355 ml of water) takes roughly 20 g of coffee.
  • Half a liter (500 ml) takes about 27–28 g.
  • A full liter takes 55 g.

That's our arithmetic from the SCA ratio, not a commandment. Weighing beats scooping simply because a scale tells you exactly what you used, so tomorrow's cup can repeat today's or deliberately change it.

Grind and time: the knobs that move extraction

Grind size and contact time are how you steer extraction. The SCA's home-brewer rules call for water to stay in contact with the grounds for more than 4 and less than 8 minutes "depending on grind," and its test grind is a medium drip grind, mostly particles between about 0.6 and 1.2 millimeters.[2] Finer grounds and longer contact pull out more; coarser grounds and shorter contact pull out less. When UC Davis researchers needed specific strengths and extractions, those are the settings they changed: grind size, flow rate and brew time.[3][4]

What changing them does to flavor is where the trained panels earn their keep. In the UC Davis tests, bitterness and burnt-wood or ashy notes climbed as strength and extraction both rose. Sourness rose when coffee was strong but under-extracted. Sweetness, perhaps surprisingly, peaked in weaker, less-extracted brews.[1][5]

Water temperature: less sacred than advertised

Certified home brewers must get water hitting the grounds to 92°C (about 198°F) within the first minute and never above 96°C (about 205°F).[2] That rule is where a lot of "never brew below 200°F" advice comes from. Then UC Davis tested it. When researchers brewed coffee at 87, 90 and 93°C and adjusted grind and brew time so every batch hit the same strength and extraction, trained tasters couldn't find any meaningful difference. Strength and extraction moved flavor plenty; temperature barely registered.[3]

The lead researcher's caveat matters: hotter water does extract faster, so temperature still changes how you reach a given cup. It's "the destination that matters, not the route you took to get there," as UC Davis Coffee Center director William Ristenpart put it. The study tested one washed Honduran coffee in drip brewers, and he said more unusual coffees might behave differently.[4] At home that means water a little off the boil is fine. If you brew cooler, expect to grind a bit finer or brew a bit longer to land the same cup.

There's no single perfect cup, and research says so

The old control chart crowned one "ideal" zone. When UC Davis served 118 black-coffee drinkers brews spread across the whole chart, people fell into two camps with different tastes, and the authors concluded the chart's single "ideal" should be reconsidered.[6] The team's 2023 redesigned chart reports that the larger group (57%) liked lower-strength coffee best, peaking around 18% extraction. The other 43% liked two different styles about equally.[7] So brewing stronger doesn't automatically mean brewing better. If you like your coffee bold, you're not wrong, just in a different camp.

Fix your cup: a quick troubleshooting guide

  • Sour, sharp, thin: likely under-extracted. Grind finer or brew longer before you touch the ratio.[1]
  • Bitter, ashy, harsh: likely too strong and over-extracted. Grind coarser, shorten contact time, or add a little water.[1]
  • Weak but otherwise pleasant: use a little more coffee per gram of water.
  • Heavy and muddy, with flavors flattened: try a weaker brew. Sweetness and some flavors showed up more at lower strength in the UC Davis tests.[1][5]

Change one thing at a time, write it down, and repeat what works. That's the whole "method."

The short version

Weigh about 55 g of coffee per liter of water, use a medium grind for drip, aim for a few minutes of contact, use water hot enough without worshipping a thermometer, and adjust by taste. If you'd rather skip the gear entirely, our instant coffee guide covers hot and iced cups. Our beans, including Colombia, Ethiopia Natural, French Roast and Peru Decaf, are on the shop page. More reading is in Coffee & Tea Guides. A Drink to Think.

FAQ

What's the best coffee-to-water ratio?

The SCA's standard starting point is about 55 g of coffee per liter of water, roughly 1:18, adjusted to taste.[2]

Do I need water at exactly 200°F?

No. In UC Davis tests, brews made at 87–93°C tasted alike when strength and extraction matched. Temperature mainly changes how fast extraction happens.[3][4]

Why does my coffee taste sour?

Sourness rose in strong, under-extracted brews in UC Davis panel tests. Try a finer grind or a longer brew.[1]

Is stronger coffee better coffee?

Not by the research. Most tasters in the UC Davis consumer study preferred lower-strength brews, and preferences split into two groups.[6][7]

Sources

  1. Scott Frost, Mackenzie Batali, Jean-Xavier Guinard and William D. Ristenpart, "Towards a New Brewing Chart," 25 magazine, Issue 13, Specialty Coffee Association: https://sca.coffee/sca-news/25/issue-13/towards-a-new-brewing-chart-xpj8t
  2. Specialty Coffee Association, "Certified Home Brewer Program: Minimum Certification Requirements" (2017), PDF: https://links.imagerelay.com/cdn/2615/ql/4bf57b3a901046b492d45b7015455c76/2017-SCA-CHB-Program-Requirements.pdf
  3. Mackenzie E. Batali, William D. Ristenpart and Jean-Xavier Guinard, "Brew temperature, at fixed brew strength and extraction, has little impact on the sensory profile of drip brew coffee," Scientific Reports 10, 16450 (2020): https://www.nature.com/articles/s41598-020-73341-4
  4. Specialty Coffee Association, "Just Published: Brewing Temperature and the Sensory Profile of Brewed Coffee" (Peter Giuliano interviews William Ristenpart): https://sca.coffee/sca-news/read/just-published-brewing-temperature-and-the-sensory-profile-of-brewed-coffee-37dt6
  5. Scott C. Frost, William D. Ristenpart and Jean-Xavier Guinard, "Effects of brew strength, brew yield, and roast on the sensory quality of drip brewed coffee," Journal of Food Science 85:8 (2020), 2530–2543: https://doi.org/10.1111/1750-3841.15326
  6. Andrew R. Cotter, Mackenzie E. Batali, William D. Ristenpart and Jean-Xavier Guinard, "Consumer preferences for black coffee are spread over a wide range of brew strengths and extraction yields," Journal of Food Science (2021): https://doi.org/10.1111/1750-3841.15561
  7. Jean-Xavier Guinard, Scott C. Frost, Mackenzie E. Batali and William D. Ristenpart, "A new Coffee Brewing Control Chart relating sensory properties and consumer liking to brew strength, extraction yield, and brew ratio," Journal of Food Science (2023), PubMed: https://pubmed.ncbi.nlm.nih.gov/36988107/